Заклепочник резьбовых заклепок своими руками


We all know what a great thing screwed rivets are.

In some cases, they have no alternative.
Until one particular time, I somehow managed without them. But one day a wonderful car came to me, to which it was necessary to install windows protection. Here's this:


Disassemble half of the cabin to shove inside of the usual nuts — not an option. In the car there are many devices, such as a luggage organizer, an autonomy, which made it difficult to dismantle the cabin. Some body parts are auto aluminum. And then I realized that it's time to learn.
On the Internet, everyone writes that rivets are put using a bolt and nut. The bolt is screwed into the rivet, on which the nut is screwed. Then the bolt is held with a key, and the nut is twisted, thereby riveting the rivet.
I'll tell you so that with M4, maybe it's going to be a ride, but the M6 ​​rivets I needed did not always work that way. And if заклепочник it did, the bolt was not suitable for the following rivets.

Then I started to collective farm, and in the end it turned out, although not presentable in appearance, but very functional, and with its help I put more than a dozen staves.
The basis is a bolt M6, strength 8.8

That's how it looks in the collection, with an established riveting

Basic Details:
Bolt M6. A piece of bolt M12. More precisely the bolt nebylo, studs. On one side, the nut is welded, turning it into a bolt. The hairpin is drilled through D = 6.5mm.
Then there is a nut from the stepladder UAZ. Strong. Further — the bearing bearing, dimensions are not fundamental. Next — a washer with a connection from the brake pipe. Too заклепочник резьбовых заклепок своими руками it is not basic. What was, then set.

The principle of work I think is understandable. Drill the hole, under M6 riveting it seems 9mm. We paste the adaptation. With one key, hold the nut 1, and with the second key unscrew the nut 2.

As the effort has increased, then the rivet is over. Turn everything back to weakening, twist the M6 ​​bolt, and set the next one.

Powered by Google Translate



Рекомендуем посмотреть ещё:


Закрыть ... [X]

Screw rivet attachment «DIY» on DRIVE 2 Как лечить ожог кипятком в домашних условиях народные средства


Заклепочник резьбовых заклепок своими руками Заклепочник резьбовых заклепок своими руками Заклепочник резьбовых заклепок своими руками Заклепочник резьбовых заклепок своими руками Заклепочник резьбовых заклепок своими руками Заклепочник резьбовых заклепок своими руками Заклепочник резьбовых заклепок своими руками

Дата: 14.02.2018, 10:58 / Просмотров: 81594